Sun-microsystems 6900 Instrukcja Użytkownika Pobierz pdf (Strona 170)

150 Sun StorEdge 3900 and 6900 Series 2.0 Troubleshooting Guide • March 2003

Sun Proprietary/Confidential: Internal Use Only

FIGURE 11-4 Diagnostics Using QLogic SunBlade

In this example, the HBA-to-switch cable was removed temporarily and a loopback

connector was inserted into the HBA. The Qlogc SANblade LoopBack diagnostics

were then run. The HBA passed the tests.

Note – The next components that can be isolated are the switch-side GBIC and the

Sun StorEdge network FC switch itself.

For these components, you can launch the tests using the Storage Automated

Diagnostic Environment Diagnose -> Tests -> Test From Topology functionality.

5. Again, temporarily remove the cable from the switch port in question, insert a

loopback connector plug and run the switch port diagnostics.

The first run will test the switch-side GBIC as well as the Sun StorEdge network FC

switch.

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 203 204

Brak uwag

Sun-microsystems 6900 Instrukcja Użytkownika Strona 170