Sun-microsystems Sun FastEthernet PCI Adapter 805-1759-10 Instrukcja Użytkownika Pobierz pdf (Strona 22)

10 Sun FastEthernet PCI Adapter Installation and User’s Guide • July 1997

Monitoring Network Activity

Perform the following task to verify that the system recognizes the Ethernet

connection. Make sure that you are connected to an active network.

● To monitor network activity or incoming network packets, type the following at

the ok promp:

Note – In the example above, <full path name of the hme interface> is the full path name

of the hme interface. Use the show-devs command at the ok prompt to display the

full path name of the hme device.

Rebooting the System

After you have examined the network activity, perform a reconfiguration boot on

your system so the operating environment can recognize the Sun FastEthernet PCI

Adapter.

● Perform a reconfiguration boot on the system.

Refer to the Solaris 2.x Peripheral’s Handbook for more information.

ok apply watch-net <full path name of the hme interface>

Internal loopback test -- succeeded.

Transceiver check -- passed.

Looking for Ethernet Packets.

‘.’ is a Good Packet. ‘X’ is a Bad Packet.

Type any key to stop.

............................................

ok boot -r

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 37 38

Brak uwag

Sun-microsystems Sun FastEthernet PCI Adapter 805-1759-10 Instrukcja Użytkownika Strona 22