Sun-microsystems Ethernet MMF/UTP Adapter Instrukcja Użytkownika Pobierz pdf (Strona 108)

74 Sun PCI-Express Dual Gigabit Ethernet MMF/UTP Adapter Installation and User’s Guide • June 2006

7. Use the test command and the device paths found in Step 6 to test the adapter

when you use the FCode self-test.

The structure of the test command line includes the following device parameters:

where:

s = 1000, 100, 10, auto

d = half, full, auto

c = master, slave, auto

Note – The speed, duplex, and link-clock parameters are optional tests.

The following default tests are run when you execute the test command:

■ Tests six groups of Ophir registers (You can see the names of the six groups in the

output sample shown on the following page.)

■ Internal loopback test for the UTP card and external loopback test for the MMF

card.

■ 10 Mbps PHY loopback.

Refer to the appropriate OpenBoot Command Reference Manual for more information

about the test command.

ok test device-path:speed=s,duplex=d,link-clock=c,promiscuous,

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 121 122

Brak uwag

Sun-microsystems Ethernet MMF/UTP Adapter Instrukcja Użytkownika Strona 108