Sun-microsystems Ethernet Device Driver none Instrukcja Użytkownika Pobierz pdf (Strona 34)

26 Platform Notes: The hme Fast Ethernet Device Driver—May 1996

These parameter values, described in Chapter 3, are applicable to all SUNW,hme

devices on the system. Refer to Table 3-2 on page 11 through Table 3-8 on

page 16 for parameter descriptions. For example:

▼ To set the ipg1 to 10 and ipg2 to 5 when you reboot

1. Become superuser.

2. Add the following lines to the /etc/system ﬁle:

3. Save the /etc/system ﬁle.

4. Save all ﬁles and exit all programs. Exit the windowing system.

5. Reboot the system by typing init 6 at the # prompt.

The system is halted and then rebooted.

adv_100T4_cap hme_adv_100T4_cap

adv_100fdx_cap hme_adv_100fdx_cap

adv_100hdx_cap hme_adv_100hdx_cap

adv_10fdx_cap hme_adv_10fdx_cap

adv_10hdx_cap hme_adv_10hdx_cap

lance_mode hme_lance_mode

ipg0 hme_ipg0

set hme:hme_ipg1 = 10

set hme:hme_ipg2 = 5

Table 4-1 Setting Variables in the /etc/system File

(Continued)

Parameter Variable

1 2 ... 29 30 31 32 33 34 35 36

Brak uwag

Sun-microsystems Ethernet Device Driver none Instrukcja Użytkownika Strona 34