Sun Microsystems X2100 Instrukcja Użytkownika Pobierz pdf (Strona 15)

Chapter 1 System Setup 1-5

1.4.1 Disassembling the Slide-Rails Before Installation

Use this procedure to remove the mounting brackets from the slide-rail assemblies.

1. Unpack the slide-rails.

2. Locate the slide-rail lock at the front of one of the slide-rail assemblies, as shown

FIGURE 1-2.

3. Squeeze and hold the tabs at the top and bottom of the lock while you pull the

mounting bracket out of the slide-rail assembly, until it reaches the stop. See

FIGURE 1-2.

4. Pull the mounting bracket release button toward the front of the mounting

bracket, as shown in

FIGURE 1-2, and simultaneously withdraw the mounting

bracket from the slide-rail assembly.

5. Repeat for the remaining slide-rail assembly.

FIGURE 1-2 Disassembling the Slide-Rail Before Installation

Slide-rail lock

Mounting bracket

release button

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 77 78

Brak uwag

Sun Microsystems X2100 Instrukcja Użytkownika Strona 15