Sun-microsystems X4150 Instrukcja Użytkownika Pobierz pdf (Strona 52)

42 Sun Fire X4150 Server Installation Guide • May 2009

f. Press Enter on the terminal device to establish a connection between the

terminal device and the LOM service processor (SP).

The following prompt appears.

3. Use a pencil, or other pointed object, to press and release the recessed Power

button on the server front panel.

When main power is applied to the server, the Power/OK LED next to the Power

button lights and remains lit.

4. To display a screen for configuring the preinstalled Solaris OS from the system

management port, do one of the following

ELOM:

a. Type: cd /SP/AgentInfo

b. Type: start Console

ILOM:

Type: start/SP/Console

5. Install and configure the software, as required.

Note – Do one of the following from the serial console:

ELOM: To switch back to the Embedded LOM command-line interface from the

serial console, press Esc + Shift + 9, or press Esc ( , depending on your

keyboard location.

ILOM: To switch back to the ILOM command-line interface from the serial console,

press Esc ( , depending on your keyboard location.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 81 82

Brak uwag

Sun-microsystems X4150 Instrukcja Użytkownika Strona 52